 |
| |
|
 |
Thorough
and sustained maintenance for all riding surfaces: loosening,
mixing, smoothing and tilling in one quick step with
the „RS-Platz-Max“. |
| |
 |
| Hoof
print rake, retractable |
To the right
and left sides are located side cushion
rollers which protect and preserve the side
cushions of the riding arena. Thorough and
sustained maintenance for |
|
|
Collision
buffer of the hoof print rake:
maintains a distance and prevents the eventuality
of the machine becoming bogged down. |
|
|
| |
 |
1 |
|
The „currycomb“ teeth are
arranged in two staggered
rows. It is their task to break up the ground
surface of
the arena, riding area, etc., which has been
hardened and compressed by the activity of
horses’ hooves and to thoroughly intermix
the surface materials (e.g., sand with textile
shreds). As soon as the tractor accelerates,
these teeth start to vibrate and act like
a „kitchen mixer“. |
|
|
| |
2 |
Behind
the teeth is located the pivoting
leveller blade that evens
out the rotated
ground surface, fills up holes and removes
any unevenness. |
|
| |
|
3 |
The tilling
roller performs the third task: It
smoothes out the last lumps, spreads, loosens
and levels out the ground completely. In addition,
it constantly brings the appliance back
into alignment. |
|
| |
|
| |
 |
|
| Schematic
diagram of the mode of operation of the hoof print
rake |
| The
levelling plate immediately smoothes
the ground surface |
|
|
| To
the left or right side as desired is mounted a hoof
print rake similar in appearance to a small plough
share which eliminates the necessity for the troublesome
and extremely backbreaking job of shovelling free
the floor trimming at the edge of the arena by hand. |
|
The exterior „bank“
of earth thrown up by the machine is raked
back into the indentation of the hoof print |
|
|
| |
The welded frame is totally stable,
indestructible in construction. The only parts subject
to wear and tear are the teeth. However, favourablypriced
replacements are available. Numerous adjustment and setting
elements permit the „RS-Platz-Max“ to be tuned
to meet all ground conditions or depths, hard or easy
ground,
high or flat surfaces. |
Skimmer attachment
„Skimmers“ can be mounted additionally
onto the „RS-Platz-Max“ for the breaking
up of severely compressed outdoor areas.
|
Totally variable – universally
employable |
| |
 |
|
1
|
Compressions in the
surface layer 2 Holes |
| 3 |
Accumulations of material (including
additives) |
| 4 |
The working depth can be adjusted
to the exact centimetre – important in case
of ground surfaces that have been applied on top
of an easily scratched bitumen or synthetic grid
layer, etc. |
| 5 |
The teeth really „stir up“
the ground, intermixing and loosening the surface
layer (the dividing layer and Sub-assembly
are not affected) |
|
| 6 |
Levelling of holes, accumulations,
hoof
prints, etc. |
| 7 |
Additional pulverisation, homogenisation
and levelling of the loosened surface layer |
| 8 |
Here: Dividing layer of
modern gridded
sheeting |
| 9 |
Sub-assembly |
|
| |
|
 |
 |
|
|
